Lightolier IS_CACS User Manual download pdf

INSTALLATION OF STEM KIT ONTO CEILING

(Fig. 1 & 2)

(NOTE: If custom length is required see page 2.)

1. Assemble STEM to BALL ALIGNER using set screws. Pull wires

through BALL ALIGNER leaving no less than 6" exposed.

2. For sloped ceilings, position opening in CROSSBAR facing

upward. (Fig. 2) Install CROSSBAR using OUTLET BOX SCREWS.

3. Place BALL ALIGNER of STEM into CROSSBAR through side

access hole. When seated the BALL ALLIGNER keyway will line up

with TAB on CROSSBAR.

4. Slide SAFETY STRAP into position and secure in position with

screw.

5. Make Connections. Bare Copper and/or green insulation wire(s)

must be connected to SUPPLY GROUND. Connect WHITE

LEAD to NEUTRAL (WHITE) SUPPLY LEAD. Connect BLACK

LEAD to HOT SUPPLY LEAD. Use wire nuts (local hardware

items). Push spliced leads into outlet box.

6. Slide CANOPY over CROSSBAR and push up against ceiling.

7. Insert SUPPORT COVER onto stem, secure with LOCK WASHER

and LOCK NUT.

FIG. 1

OUTLET BOX

SCREWS

CROSSBAR

CANOPY

BALL ALIGNER

SAFETY STRAP

SUPPORT

COVER

SCREWS

STEM

LOCK NUT

LOCK WASHER

OCTAGON

OUTLET BOX

(BY OTHERS)

45° MAX.

FIG. 2

STEM

BALL ALIGNER

CROSSBAR

SAFETY STRAP

A COMPANY

631 Airport Road, Fall River, MA 02720

READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING FIXTURE

This fixture is intended for installation in accordance with the National Electrical Code and local regulations. To

assure full compliance with local codes and regulations, check with your local electrical inspector before

installation. To prevent electric shock, turn off electricity at fuse box before proceeding.

Retain these instructions for maintenance reference.

INSTRUCTION SHEET NO.

IS:CACS

Page 1 of 2

A0604

INSTALLATION PROCEDURE FOR: CEILING MOUNT STEM KIT CACS AND C4CS SERIES

USED WITH CEILING MOUNT CYLINDERS (ORDER SEPARATELY)

WARNING: USE ONLY FIXTURE PROVIDED BY LIGHTOLIER. USE OF OTHER MANUFACTURES’ FIXTURES MAY VOID

THE UNDERWRITERS LABRATORIES LISTING AND COULD CONSTITUTE A FIRE HAZARD.

1 2

IS:CACS 1

Summary of Contents

Page 1 - IS:CACS

INSTALLATION OF STEM KIT ONTO CEILING (Fig. 1 & 2) (NOTE: If custom length is requi

Page 2

FIBERGLASS PAD (DISCARDED) INSTALLATION OF CEILING MOUNT CYLINDER TO STEM (Fig. 1 & 3) 1. Attach (2) SPRING CLIPS to CYLINDER HOUSING by sliding

Comments to this Manuals

No comments

Lightolier IS_CACS User Manual

Browse online or download User Manual for Unknown Lightolier IS_CACS. Lightolier IS_CACS User's Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Unknown Lightolier IS_CACS